|
|
| All dimensions are given in inches |
|
BB96 |
BB72 |
BB48 |
N96 |
N72 |
N48 |
HD96 |
HD72 |
HD48 |
CB96 |
CB72 |
CB48 |
| OAL |
95 |
72 |
48 |
95 |
72 |
48 |
95 |
72 |
48 |
95 |
72 |
48 |
| OAW |
48 |
48 |
48 |
24 |
24 |
24 |
48 |
48 |
48 |
40 |
40 |
40 |
| TALL |
10 11⁄16 |
10 11⁄16 |
10 11⁄16 |
10 11⁄16 |
10 11⁄16 |
10 11⁄16 |
14 15⁄32 |
14 15⁄32 |
14 15⁄32 |
10 11⁄16 |
10 11⁄16 |
10 11⁄16 |
| Clear Storage Inside of a Drawer |
|
BB96 |
BB72 |
BB48 |
N96 |
N72 |
N48 |
HD96 |
HD72 |
HD48 |
CB96 |
CB72 |
CB48 |
| Left to Right |
| with cross dividers |
22 15⁄32 |
22 15⁄32 |
22 15⁄32 |
22 15⁄32 |
22 15⁄32 |
22 15⁄32 |
21 1⁄8 |
21 1⁄8 |
21 1⁄8 |
18 15⁄32 |
18 15⁄32 |
18 15⁄32 |
| with length dividers |
23 3⁄16 |
23 3⁄16 |
23 3⁄16 |
23 3⁄16 |
23 3⁄16 |
23 3⁄16 |
21 3⁄4 |
21 3⁄4 |
21 3⁄4 |
19 3⁄16 |
19 3⁄16 |
19 3⁄16 |
| Front to Rear |
| with cross dividers |
90 |
67 |
43 |
90 |
67 |
43 |
87 15⁄16 |
64 15⁄16 |
40 15⁄16 |
90 |
67 |
43 |
| with length dividers |
89 9⁄16 |
66 9⁄16 |
42 9⁄16 |
89 9⁄16 |
66 9⁄16 |
42 9⁄16 |
87 ½ |
64 ½ |
40 ½ |
89 9⁄16 |
66 9⁄16 |
42 9⁄16 |
| Top to Bottom |
| with cross dividers |
9 |
9 |
9 |
9 |
9 |
9 |
9 5⁄8 |
9 5⁄8 |
9 5⁄8 |
9 |
9 |
9 |
| with length dividers |
8 9⁄16 |
8 9⁄16 |
8 9⁄16 |
8 9⁄16 |
8 9⁄16 |
8 9⁄16 |
9 7⁄32 |
9 7⁄32 |
9 7⁄32 |
8 9⁄16 |
8 9⁄16 |
8 9⁄16 |
Drawer Pull Systems - Pull Handle
- The top of the face of the drawer on BB, CB, and N Series
toolboxes is formed to create a handle. Use the formed lip to
pull the drawer open.
Drawer Pull Systems - T Handle
- On the HD Series toolboxes the T handle can be used to pull
the drawer open.
Type of Latch
- T handles are now standard on all of the toolboxes shown above
- A "T" un-folds out of the latch. It is rotated 90 deg. to
allow the drawer to be opened.
- In the Locking position, the T handle accommodates a pad lock. The
pad lock can be used in place or in conjunction with the integrated
locking system.
- CAUTION, if the tool box is located tight against the tailgate,
make certain that the T is in the locking position before closing
the tail gate.
OAL - Over All Length, front to back of box or
tail gate to headboard of truck. Given as an outside dimension.
OAW - Over All Width, left to right or between
the wheel wells of truck. Given as an outside dimension.
TALL - Tall, from the mounting surface to the
top of the diamond plate deck. Given as an outside dimension.
Clear Storage
- Left to right - The left to right inside clear space is diminished
by the "V" welded to the side of the drawer to hold the divider.
- Front to Center - The front to rear inside clear space is diminished
by the rollers in the back of the drawer, the latch system, the "V" welded
to the inside to hold the dividers.
- Top to Bottom - The top to bottom inside clear space is diminished
by the rollers or slides under the drawer, the reinforcements
welded to the deck, and the "V" welded to the bottom of the drawer
to hold the dividers.
|
